Fasteners & Bolts
Refractory Anchor
Buttweld Fittings
Forged Fittings
Flanges
Valves
   
»
Gate Valve
»
Globe Valve
»
Check Valve
»
Ball Valve
»
Pressure Seal Valve
»
Cryogenic Valve
   
Other Product
 
 
 

We are engaged in importing and supplying a comprehensive range of Valves that helps in regulating the flow of liquids through a sequence of pipes. Resistance to water, durability and high end functionality makes these valves highly acclaimed across the country. Moreover, procured form reliable vendors, who manufacture these valves utilizing quality raw material, these valves can also be customized as per the technical specifications given by the clients.


Gate Valve

Stelcom gate valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with non rising hand wheel. Straight through bore design assures minimum turbulence, erosion and resistance to flow. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. These are widely suited for high pressure and temperature and variety of fluids.

Gate valves are adequate for all service media along with Hydrogen service, Oxygen service, Hydrocarbon service and NACE applications. Other optional features like Live loading, lantern ring, Bleed holes, purging lines and other features are available on request.

Product Range
Size Range Class
2" - 60" Class 150
2" - 48" Class 300
2" - 42" Class 600
2" - 24" Class 900
2" - 16" Class 1500
2" - 16" Class 2500
1/2" - 2" Class 800
1/2" - 2" Class 800
1/2"-2" Class 1500
1/2" - 2" Class 2500
Standard
Design Standard API 600/BS1414
Testing Standard API 598/BS EN 12266-1
Face To Face ASME B 16.10
End Connection Flanged End - ASME B 16.5
  Butt Weld End – ASME B 16.25
Pressure – Temperature Chart ASME B 16.34

 

 


Valve Operation
Operator Size Range
Handwheel 2” – 10” - Class 150, 300, 600
  2” – 4” - Class 900 & 1500
Gear Operator 12” & Above - Class 150, 300, 600
  6” & Above - Class 900,1500

Material

STRUCTURE
   
End Connection
Flanged End Raised Face, Butt Weld End, RTJ,. ETC
Operation
Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
MATERIAL
Shell
WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim
13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel
-----------------------------------------------------------------------------------------------------------------------

Globe Valve

Stelcom globe valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem and hand wheel. Valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90º changes of direction resulting in pressure drop and turbulence. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Globe valves are generally considered where moderate control or regulation of flow is required.

Globe valves are adequate for all service media. Valves are marked with flow direction since they are recommended to install with flow and pressure under the disc. It can also be installed in reverse condition depending upon the conditions. The globe valve is generally faster to operate due to less travel. But requires much force to operate compared to gate valves.

Product Range
Size Range Class
2" - 24" Class 150
2" - 16" Class 300
2" - 16" Class 600
2" - 12" Class 900
2" - 12" Class 1500
1/2"-11/2" Class 800
   
Standard
Design Standard BS 1873
Testing Standard BS EN 12266 – 1
Face To Face ASME B 16.10
End Connection Flanged End - ASME B 16.5
  Butt Weld End – ASME B 16.25
Pressure – Temperature Chart ASME B 16.34

 

Valve Operation
Operator Size Range
Handwheel 2"-10"-Class 150, 300
  2"-6"-Class 600
  2"-4"-Class 900, 1500
Gear Operator 12” & Above - Class 150 & 300
  8” & Above - Class 600
  12” & Above - Class 900 & 1500

Material

STRUCTURE
End Connection
Flanged End Raised Face, Butt Weld End, RTJ,. ETC
Operation
Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
MATERIAL
Shell
WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim
13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel
 
-----------------------------------------------------------------------------------------------------------------------

Check Valve

Stelcom check valves are heavy duty, bolted cover, renewable seat ring, and body mounted disc swing type. Valves are straight through flow which works automatically. They are opened by the force of velocity pressure and closed by the force of gravity and back pressure. The valves are single direction flow and restrains flow in opposite direction. Distortion, wear and noisy operation of the valve can be avoided by selecting the size of the valve on the basis of flow conditions.

Swing Check valves are best suited for moderate velocity operations. Swing check valves are normally designed for horizontal installations. It can be installed in vertical direction with flow in upward under the disc. There is no tendency for seat to gall because the disc meets flat surface without rubbing upon contact.

The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Flow directions are marked as cast on the body for ease of installation.

Swing Check valves are adequate for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.

Product Range
Size Range Class
2" - 24" Class 150
2" - 24" Class 300
2" - 24" Class 600
2" - 12" Class 900
2" - 12" Class 1500
1/2"-11/2" Class 800
   
Standard
Design Standard BS 1868
Testing Standard BS EN 12266 – 1
Face To Face ASME B 16.10
End Connection Flanged End - ASME B 16.5
  Butt Weld End – ASME B 16.25
Pressure – Temperature Chart ASME B 16.34


Material

STRUCTURE
End Connection
Flanged End Raised Face, Butt Weld End, RTJ,. ETC
MATERIAL
Shell
WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim
13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel
-----------------------------------------------------------------------------------------------------------------------

Ball valve

Stelcom Trunnion Mounted Ball Valve is the result of Innovative engineering. It embodies all the quality, Performance, value and safety features required for critical applications.

In Trunnion Mounted Ball Valve, the ball rotates without moving on the horizontal axis, where as seats are floating and free to move on the same axis. As the pressure increases the force on the seat ring by the pressure pushes towards the ball giving ‘BIDIRECTIONAL’ sealing.

Thrust due to (Fluid Pressure + spring) both on the upstream and downstream, pushes seat ring towards the ball for positive sealing under all conditions.

When the valve is in closed position, the fluid trapped in the body cavity is subjected to thermal expansion and the valve cavity pressure increases. The excessive pressure buildup within the valve cavity is relieved automatically when the pressure inside exceed the spring load on the seat.

Internal Trunnion reduces the chance of fluid leakage to the atmosphere as in the case of external Trunnion Mounted ball Valves.

Product Range
Ball Valves
Size Range Class
2" - 48" Class 150
2" - 48" Class 300
2" - 36" Class 600
   
Trunnion Mounted Ball Valve
Size Range Class
2" - 36" Class 150
2" - 36" Class 300
2" - 36" Class 600
2" - 16" Class 900
2" - 36" Class 1500
Floating Ball Valve
Size Range Class
1/2" - 2"
 2" -  6"
Class 150
1/2" - 2"
 2" -  6"
Class 300
1/2" - 2"
 2" -  4"
Class 600
1/2" - 2" Class 800


Standard
Design Standard API 6D/ASME B16.34
Testing Standard API 6D/API 598
Face To Face ASME B 16.10/API 6D
End Connection Flanged End - ASME B 16.5
  Butt Weld End – ASME B 16.25
Pressure – Temperature Chart ASME B 16.34
Valve Operation
Operator Size Range
Lever 2"-3"- Class 150, 300, 600
Gear Operator 6” & Above - Class 150, 300, 600

Material

STRUCTURE
End Connection
Flanged End Raised Face, Butt Weld End, RTJ,. ETC
Operation
lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
MATERIAL
Shell
WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim
13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel
-----------------------------------------------------------------------------------------------------------------------

Pressure Seal Valve

Stelcom Cryogenic valves, except check valves are supplied with extended bonnet with a sufficient gas column length. Usually supplied by the user, to eliminate any chance of frosting of the packing area.
The cryogenic valves are installed on applications involving the production, transport and storage of liquefied gases such as oxygen, nitrogen, argon, natural gas, hydrogen or helium down to -254ºC.
The cryogenic valves are designed with compliance of ASME B16.34 and BS 6364. The cryogenic tests are performed in fully equipped in-house facilities, according to BS 6364.

 

Standard
  Design Standard ASME B16.34 / BS 6364
  Testing Standard BS 6364
  Face To Face ASME B 16.10
  End Connection Flanged End - ASME B 16.5
  Butt Weld End – ASME B 16.25
  Pressure – Temperature   Chart ASME B 16.34
  Body material CF8M, CF8 and other low temperature steels
-----------------------------------------------------------------------------------------------------------------------

Cryogenic Valve

Stelcom High pressure valves (pressure seal type) offer high performance, reliability and safety. The valves are especially suitable for high pressure and high temperature applications in steam, oil and gas processing, power industry and in the chemical and petrochemical industry.

Oswal's High Pressure series Gate, Globe & Check valves are the result of development of new technology with uncompromising standards of design excellence, product quality and integrity. Engineered for rigorous performance, and strict manufacturing processes are adhered to in order to maintain consistent compliance to various international standards.

 

Technical Specification
Design Standard ASME B 16.34
Testing Standard

ASME B 16.34

Operating Pressure Up To 439 bar ( 6250 PSI )
Operating Temperature

Up To +593º C / 1100º F

Pressure Temperature Rating ASME B 16.34
Face To Face

ASME B 16.10 Short Pattern For Butt-weld End
ASME B 16.10 LONG Pattern for Flanged End

Flanged End

ASME B 16.5

Butt Weld End

ASME B 16.25

Material WCB, LCB, WC6, WC9, C5, C12, CF8M & Others.
General Application High Pressure and High Temperature applications like Steam,  Oil and Gas Processing, Chemical and Petrochemical Industry and in the Power Industry.

 

                                                                      Standard
 Valve Type
Class
2"
3"
4"
6"
8"
12"
 Gate
900
1500
2500
 Globe
900
1500
2500
 Check
900
1500
2500


  © All rights reserved by Stelcom metal & alloys 2011